FZP II VS Zykon ankkuri julkisivupaneelille
  • Product Picture: "fischer Zykon panel anchor FZP II 13 x 30 M8/VS/4 AL"
  • Product Picture: "fischer Zykon panel anchor FZP II 13 x 30 M8/VS/4 AL"
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Product Picture
    • Application Picture
      Tuotenumero 512149

      fischer Zykon panel anchor FZP II 13 x 30 M8/VS/4 AL

      Tuotevaihtoehdot
      CAD Data
      Download of image data
      Huippu ominaisuudet
      • Stand-off installation and compensation of panel thickness tolerances for highest visual requirements.
      • The integrated suspension nut combined with the suspension clasps Vertical Solution enable an easy panel installation (keyhole principle)
      • For all natural stones class I-IV.
      • Stress-free fixing enables high loads and use of thin panels.
      • Sleeve made of stainless steel.

      Edut / Tuotekuvaus

      The suspension anchor with the fischer Vertical Solution for natural stone façade panels.
      Edut
      • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
      • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
      • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
      • The anchor allows for higher pull-out loads, compared to commonly available systems.
      • Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
      The concealed stand-off installation solution using undercut anchors for heavy natural stone façade panels. This anchor can only be used with the fischer Vertical Solution subframe system. Suspension brackets designed based on a lock and key principle are used to install the undercut anchors. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses and create a flat façade surface by stand-off installation anchors.

      Hakemus ja hyväksyminen

      Sovellukset
      • Exterior façades with high aesthetic requirements and a reduced wall construction
      • Interior façades with high aesthetic requirements and a reduced wall construction
      Rakennusainet
      • Natural stone (>20mm)
      Löydät yksityiskohtaiset tiedot rakennusmateriaaleista rekisteröintiasiakirjasta.
      Hyväksynnät
      • ETA-11/0145
      • DoP No. 0307

      Kokoamisohje

      Toimintaperiaate / asennus
      • Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
      • When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
      • The anchor is installed in the conical undercut drill hole using stand-off installation.
      • The ability to compensate panel thickness tolerances helps create a flat façade surface.
      • Suspension brackets designed based on a lock and key principle are also used during installation.
      Mounting Strip 1 Picture
      1 / 6
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture
      • 5
        Mounting Strip 1 Picture
      • 6
        Mounting Strip 1 Picture

      Tekniset tiedot

      ETA-hyväksyntä
      Levyn min. paksuus 30 mm
      Kokonaispituus (
      l
      )      		34,5 mm
      Kierre (
      M
      )      		M8
      Cylindrical diameter 13 mm
      Undercutdiameter 15,5 mm
      Määrä 250 Pa.
      GTIN (EAN-Code) 4048962112603

      Ladattavat asiakirjat

      ETA Certification Document
      pdf, ETA-11/0145
      European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
      Luotu 22.08.2024
      DOP - Declaration of Performance
      pdf, DoP No. 0307
      Declaration of Performance for fischer Zykon-panel anchor FZP II
      Luotu 01.07.2022
      cd-green-58bb58464c-47qvg