The suspension anchor with the fischer Vertical Solution for natural stone façade panels.

FZP II VS Zykon ankkuri julkisivupaneelille

The concealed stand-off installation solution using undercut anchors for heavy natural stone façade panels. This anchor can only be used with the fischer Vertical Solution subframe system. Suspension brackets designed based on a lock and key principle are used to install the undercut anchors. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses and create a flat façade surface by stand-off installation anchors.
TuotevaihtoehdotDownload of image data

Tuotevaihtoehdot

Suodatin
Suodatin
Hyväksynnät / testiraportit
3 Tuotevaihtoehtoa
Levyn min. paksuus
Kokonaispituus
Kierre
Cylindrical diameter
Undercutdiameter
Määrä
Selite = Käytettävissä oleva käyttöoikeus = Lupaa ei ole saatavilla
3 tuotevaihtoehdosta katsottu 3

Edut / Tuotekuvaus

Edut
  • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
  • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
  • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
  • The anchor allows for higher pull-out loads, compared to commonly available systems.
  • Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

Hakemus ja hyväksyminen

Hyväksynnät
  • ETA-11/0145
  • DoP No. 0307

Kokoamisohje

Toimintaperiaate / asennus
  • Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
  • When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
  • The anchor is installed in the conical undercut drill hole using stand-off installation.
  • The ability to compensate panel thickness tolerances helps create a flat façade surface.
  • Suspension brackets designed based on a lock and key principle are also used during installation.
Mounting Strip 1 Picture
1 / 6

Ladattavat asiakirjat

European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
Luotu 22.08.2024
Declaration of Performance for fischer Zykon-panel anchor FZP II
Luotu 01.07.2022
cd-green-58bb58464c-ppkw9