Art.-No. 62395

fischer Ikkunan karmiruuvi FFS 7.5 x 52 with flat head

Huippu ominaisuudet
  • Kustannustehokas ruuviasennus ilman pistokkeita
  • Kaikille kiinteille ja rei'itetyille rakennusmateriaaleille.
  • Nopea sarjan asennus 6 mm: n pienen poranreiän ansiosta
  • Rungon stressitön ja kestävä kiinnitys. Jatkuva kierre estää kehyksen vetämisen.
  • Virransäästöasennus: Erityiskierre vähentää ruuviin tarvittavaa voimaa.

The advantages / Product description

Taloudellinen erikoisruuvi, jossa on litteä pää ikkunan asennusta varten.
Edut
  • Screw installation without plug for economical processing.
  • The small drill bit diameter of 6 mm allows for efficient series installation.
  • The continuous thread ensures a stress-free fixing of the frame in the substrate.
  • The high-low-thread at the screw tip as well as several cutting notches reduce the amount of force required for screwing in the screws. The installation process can be completed without excessive effort.
  • According to the ift Rosenheim suitable for the fixation of a plastic window in brick masonry.
Fischer-ikkunarungon ruuvi FFS, jossa on litteä pää, on erikoisruuvi ikkunoiden kehysten kustannustehokkaalle kokoonpanolle. Poran jälkeen ruuvi voidaan vetää suoraan kiinteisiin ja rei'itettyihin rakennusmateriaaleihin. Jatkuva erikoiskierre estää ikkunoiden kehyksiä vetämästä alustaa vasten. Tämä vahvistetaan sitten stressitöntä, kestävää.

Application and approval

Sovellukset
  • Ikkunarungot puusta, muovista ja alumiinista
  • Oven karmit
  • Parrut
Rakennusainet
  • Betoni
  • Pystyreikätiili
  • Onteloharkko kevytbetonista
  • Hiekkakivireikätiili
  • Hiekkakiviharkko
  • Täystiili kevytbetonista
  • Täystiili
  • Kevytbetoni
You can find detailed information on building materials in the registration document.
Approvals
  • 14-000559-PRO2

Assembly instruction

Toimintaperiaate / asennus
  • Note the drill hole and screw-in depths for the different building materials listed in the table.
  • Recommended for installation of plastic and aluminium profiles.
  • Cylinder head screws are recommended for recessed installation in wooden profiles.
Mounting Strip 1 Picture
1 / 5

Technical data

Halkaisija (
d
)
7,5 mm
Ruuvin pituus (
ls
)
52 mm
Kanta TX30
Porareiän nimellishalkaisija (
d0
)
6 mm
Kannan ø (
dh
)
11,5 mm
Määrä 100 Pa.
GTIN (EAN-Code) 4006209623954

Documents for download

Test Certificate
pdf, 14-000559-PRO2
ift Rosenheim Test Report - Component test with frame screws for fastening a plastic frame of a window in the structure
Created on 07.10.2014
Window frame screws FFSZ and FFS - Recommended loads of a single screw.
cd-green-58bb58464c-djgrd