FZP II Zykon ankkuri julkisivupaneelille
  • Product Category Picture: "FZP II SO Carbon Zykon ankkuri julkisivupaneelille"
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Category Picture
    • Application Picture
    • Application Picture
      The adjusting carbon fibre-reinforced undercut anchor for natural stone.

      FZP II SO Carbon Zykon ankkuri julkisivupaneelille

      The concealed stand-off installation solution using carbon fibre-reinforced plastic undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection face on the FZP II anchor (RWT = remaining wall thickness) as a reference dimension for drilling. This technology can be used to compensate panel thicknesses to create a flat façade by using stand-off installation anchors.
      Tuotevaihtoehdot
      Download of image data

      Tuotevaihtoehdot

      Suodatin
      Suodatin
      Hyväksynnät / testiraportit
      4 Tuotevaihtoehtoa
      Levyn min. paksuus
      Kokonaispituus
      Kierre
      Cylindrical diameter
      Undercutdiameter
      Määrä
      Selite = Käytettävissä oleva käyttöoikeus— = Lupaa ei ole saatavilla
      4 tuotevaihtoehdosta katsottu 4

      Edut / Tuotekuvaus

      Edut
      • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
      • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
      • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
      • The anchor allows for higher pull-out loads, compared to commonly available systems.
      • Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.

      Hakemus ja hyväksyminen

      Hyväksynnät
      • ETA-11/0145
      • DoP No. 0307

      Kokoamisohje

      Toimintaperiaate / asennus
      • Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
      • When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
      • The anchor is installed in the conical undercut drill hole using stand-off installation.
      • The ability to compensate for panel thickness tolerances helps create a flat façade surface.
      Mounting Strip 1 Picture
      1 / 4
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture

      Ladattavat asiakirjat

      ETA Certification Document
      pdf, ETA-11/0145
      European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
      Luotu 22.08.2024
      DOP - Declaration of Performance
      pdf, DoP No. 0307
      Declaration of Performance for fischer Zykon-panel anchor FZP II
      Luotu 01.07.2022
      cd-blue-c6785f99-ht6vq