Br.art. 538088

fischer Zykon panel anchor FZP II 13 x 26 M8/SO/12 AL

Huippu ominaisuudet
  • Stand-off installation of panels with tolerances.
  • Compensation of panel thickness tolerances for highest visual requirements.
  • For all natural stones class I-IV.
  • Stress-free fixing enables high loads and use of thin panels.
  • Sleeve made of stainless steel.

Prednosti / Opis proizvoda

The adjusting undercut anchor made of A4 stainless steel for natural stone.
Edut
  • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
  • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
  • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
  • The anchor allows for higher pull-out loads, compared to commonly available systems.
  • Using a constant remaining wall thickness as a reference value when drilling holes allows users to compensate panel thickness tolerances.
The concealed stand-off installation solution using A4 stainless steel undercut anchors for heavy natural stone façade panels. This technology defines a constant distance between the front of the panel to the connection level on the FZP II anchor (RWT = remaining wall thickness as a reference dimension for drilling. This technology can be used to compensate the tolerances of panel thicknesses to create a flat façade surface by using stand-off installation anchors.

Prijava i odobrenje

Sovellukset
  • Exterior façades with high aesthetic requirements
  • Interior façades with high aesthetic requirements
Rakennusainet
  • Natural stone (>20mm)
  • Artificial concrete panels
Detaljne informacije o građevinskom materijalu možete pronaći u dokumentu za registraciju.
Odobrenja
  • ETA-11/0145
  • DoP No. 0307

Uputstvo za montažu

Toimintaperiaate / asennus
  • Wet diamond drilling - first cylindrical to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
  • When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
  • The anchor is installed in the conical undercut drill hole using stand-off installation.
  • The ability to compensate for panel thickness tolerances helps create a flat façade surface.
Mounting Strip 1 Picture
1 / 6

Tehnički Podaci

ETA-hyväksyntä
Levyn min. paksuus 30 mm
Kokonaispituus (
l
)
38 mm
Kierre (
M
)
M8
Cylindrical diameter 13 mm
Undercutdiameter 15,5 mm
Määrä 250 Pa.
GTIN (EAN-Code) 4048962260984

Dokumenti za preuzimanje

European Technical Assessment for fischer-Zykon-panel anchor FZP II - Fastener for the rear fixing of facade panels made of selected natural stones according to EN 1469:2015
Napravljeno 22.08.2024
Declaration of Performance for fischer Zykon-panel anchor FZP II
Napravljeno 01.07.2022
cd-green-58bb58464c-5xn5l