Tuotenumero 512958

fischer Zykon panel anchor FZP II 13 x 12 M6i

Huippu ominaisuudet
  • Ideal for interior applications.
  • Flush installation of panels with minor tolerances.
  • For all natural stones class I-IV.
  • Stress-free fixing enables high loads and use of thin panels.
  • Sleeve made of polyamid.

Edut / Tuotekuvaus

The undercut anchor with an internal thread for M6 threaded screws in natural stone façade panels.
Edut
  • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
  • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
  • The high-quality material of the anchor allows for higher pull-out loads than commonly used systems.
  • The integrated internal thread allows panels to be pre-fabricated and transported securely.
Concealed flush or stand-off installation solution with internal thread for natural stone façade panels. This technology can be used for both flush mounting of calibrated panels or reveal panels and to calibrate panel thickness tolerances caused by using the stand-off installation technology. Due to the integrated internal thread, there is no protruding external thread, allowing the panels to be prefabricated and transported securely. This improves the economic efficiency and flexibility of the system.

Hakemus ja hyväksyminen

Sovellukset
  • Indoor applications (such as wash basins, natural stone heating systems, ...)
Rakennusainet
  • Natural stone (>20mm)
Löydät yksityiskohtaiset tiedot rakennusmateriaaleista rekisteröintiasiakirjasta.

Kokoamisohje

Toimintaperiaate / asennus
  • Wet diamond drilling - first cylindrical, depending on the application either to the absolute anchoring depth or to a constant reference dimension for the remaining wall thickness (RWT), then conical to create an undercut drill hole.
  • When the undercut anchor is installed, an optimal positive-locking connection is created between the expanding part and the drill hole.
  • The anchor can either be installed flush to the absolute anchoring depth or can be installed in the conical undercut drill hole using stand-off installation.
  • The ability to compensate panel thickness tolerances helps create a flat façade surface
Mounting Strip 1 Picture
1 / 4

Tekniset tiedot

Levyn min. paksuus 20 mm
Kokonaispituus (
l
)
12 mm
Kierre (
M
)
M6
Cylindrical diameter 13 mm
Undercutdiameter 15,5 mm
Määrä 250 Pa.
GTIN (EAN-Code) 4048962120653
cd-green-58bb58464c-djgrd