FZP II T PA Zykon ankkuri julkisivupaneelille
  • Product Picture: "fischer Zykon panel anchor FZP II 11x5 M6/T/13 PA"
  • Product Picture: "fischer Zykon panel anchor FZP II 11x5 M6/T/13 PA"
  • Application Picture
  • Application Picture
  • Application Picture
  • Application Picture
    • Application Picture
    • Product Picture
    • Product Picture
    • Application Picture
    • Application Picture
    • Application Picture
      Tuotenumero 552889

      fischer Zykon panel anchor FZP II 11x5 M6/T/13 PA

      Tuotevaihtoehdot
      Download of image data

      Edut / Tuotekuvaus

      The specialist for thin façade panels, such as HPL and fibre cement.
      Edut
      • The anchor’s short geometry allows it to be used in thin panels with a thickness greater than 8 mm.
      • The fixing of the undercut anchor is not visible on the exposed side, creating a visually attractive and consistent façade surface.
      • The adapted shape of the undercut anchor ensures a positive-locking attachment free from expansion pressure in a conical undercut drill hole.
      • Setting the anchor using undercut technology allows the user to always select the optimal structural position in the façade panel. This greatly reduces panel deflection.
      • The positive-locking anchor is free from expansion pressure provides much better holding force than commonly available systems and allows for the use of large-format panels.
      The concealed fixing solution for thin façade panels, such as HPL, fibre cement and solid surface panels. Use in conjunction with clasps systems on façades or with other attachments.

      Hakemus ja hyväksyminen

      Sovellukset
      • Exterior façades
      • Interior façades
      • Façade reveals
      Rakennusainet
      • Fibre cement
      • HPL panels
      • Thin panel materials (≥ 8 mm)
      Löydät yksityiskohtaiset tiedot rakennusmateriaaleista rekisteröintiasiakirjasta.

      Kokoamisohje

      Toimintaperiaate / asennus
      • Use dry drilling with a diamond drill bit - first cylindrical, then conical - to drill an undercut hole.
      • When the undercut anchor is installed, an optimal, positive-locking connection is created between the expanding part and the drill hole.
      • The anchor is installed flush to the absolute anchoring depth. After the anchor is set, the spacer washer will be in full contact with the surface of the material.
      Mounting Strip 1 Picture
      1 / 4
      • 1
        Mounting Strip 1 Picture
      • 2
        Mounting Strip 1 Picture
      • 3
        Mounting Strip 1 Picture
      • 4
        Mounting Strip 1 Picture

      Tekniset tiedot

      ETA-hyväksyntä
      Levyn min. paksuus 8 mm
      Kokonaispituus (
      l
      )      		20,5 mm
      Kierre (
      M
      )      		M6
      Cylindrical diameter 11 mm
      Undercutdiameter 13,5 mm
      Määrä 250 Pa.
      GTIN (EAN-Code) 4048962362060
      cd-green-58bb58464c-vq6sw